Banner Deutsch 1024x134Px
Messtechnik Regeltechnik Reckmann
Mess- und Regeltechnik
Reckmann
Mess und Regeltechnik
Sensoren
You are herePractice > Standards

The Purchasing / Technology Department and QS define the standards, guidelines and sets of rules that are adhered to in our company. The existing documents are listed in the following standards list, which shows the current version and any relevant comments. The listed standards are managed by the QS/Technology Department, updated as required and are available for viewing there.

General

Standard Number

Title of the Standard

Version

Comment

DIN EN ISO 228-1 Pipe threads for joints that do not seal in the thread 05 / 03  
DIN 1092-1 Flanges and their joints 11 / 07 Replaces DIN 2527
DIN 3852-2 Stud ends for tube fittings 11 / 00  
DIN 7168 General tolerances 04 / 91  
DIN 7603 Seal rings 05 / 01 Replaces draft 08 / 99
DIN EN 0204                  Types of test certificate                                                                                                      01 / 05 Replaces DIN EN 10204
DIN EN ISO/IEC 17050-1      Conformity assessment; suppliers’ declaration of conformity; Part 1: General requirements 01 / 05 Replaces DIN EN 45014 ISO/EC Guide 22

Temperature Measurement

Standard Number

Title of the Standard

Version

Comment

DIN 16160              Thermometers; concepts 11 / 90  
DIN 43 710 Standard values of thermoelectric voltages for thermocouples of type U and L 12 / 85 Withdrawn without replacement
DIN 43 712 Wires for thermocouples 12 / 87 Withdrawn without replacement
DIN 43 713 Compensating wires and strands 01 / 79 Withdrawn without replacement
DIN 43 714 Compensating cables for thermocouple assemblies 06 / 79 Withdrawn without replacement
DIN 43 722 (IEC 584-3)                                   Extension and compensating cables, limiting deviations and labeling system 04 / 94  
DIN 43 724 Ceramic protection tubes and holding rings for thermocouple assemblies 02 / 79  
DIN 43 729 Connection heads for thermocouple assemblies and resistance thermometers 12 / 78 Transitional period until 01.09.2009
DIN 43 732 Thermocouples for thermocouple assemblies 03 / 86  
DIN 43 733 Straight thermocouple assemblies without replaceable measuring inserts 03 / 86  
DIN 43 734 Stop flanges for thermocouple assemblies and resistance thermometers 03 / 86 Transitional period until 01.09.2009
DIN 43 735 Measuring inserts for thermocouple assemblies 03 / 86    
DIN 43 735-1 Draft Process control technology - Electrical temperature sensors for resistance thermometers and thermocouple assemblies, Part 1: Replaceable measuring inserts 04 /05 Envisaged as a replacement for DIN 43 735
DIN 43 735-2 Draft Process control technology - Electrical temperature sensors for resistance thermometers and thermocouple assemblies, Part 2: Fitting dimensions for connection head 04 / 05 Envisaged as a replacement
for DIN 43 729
DIN 43 735-4 Draft Process control technology - Electrical temperature sensors for resistance thermometers and thermocouple assemblies, Part 3: Assignment of dimensions 04 / 05 Envisaged as a replacement for
DIN 43 764, 43 765, 43 766, 43 767    und 43 771
DIN 43 760 Basic values of Ni 100 resistance detectors 09 / 87 Withdrawn without replacement
DIN 43 762 Measuring inserts for resistance thermometers 03 / 86   
DIN 43 764 Thermometers without mounting with replaceable measuring inserts 03 / 86  
DIN 43 765 Screw-in thermometers with G 1/2" thread 03 / 86  
DIN 43 766 Screw-in thermometers with G 1" thread 03 / 86  
DIN 43 767 Weld-in thermometers 03 / 86  
DIN 43 769 Thermometers without additional protection tube 03 / 86    
DIN 43 771 Thermometers with short response time 12 / 89  
DIN 43 773 Metal protection tubes and extension tubes for liquid-in-glass thermometers, dial indicator thermometers, thermocouple assemblies and resistance thermometers, dimensions, materials, testing + supplementary sheet 1 to DIN 43772: Overview of assignment of protection tubes/thermometers 03 / 00                      Replaces DIN 43 763 and 
DIN 43 770
DIN 43 772/A1 Draft 07 / 03 Envisaged as a modification to
DIN 43 772   03 / 00
DIN EN 50112 Metal protection tubes for thermocouple assemblies 08 / 95 Transitional period until 01.09.2009
DIN EN 50113 Insulation tubes for thermocouples 08 / 95 Transitional period until 01.09.2009
DIN EN 50212 Connectors for thermocouple assemblies 04 / 97  
DIN EN 50446 Straight thermocouple assemblies with metal or ceramic protection tube and accessories 04 / 07 Replaces DIN 43 729, DIN 43 733, DIN 43 734, DIN EN 50112, DIN EN 50113
DIN EN 60584-1 Thermocouples, basic thermoelectric voltage values 10 / 96 Replaces DIN IEC 584-1, 
Replaces DIN IEC 65B
DIN EN 60584-2 Limiting deviations of thermoelectric voltages 10 / 94  
DIN EN 60584-3 Draft   Extension cables and compensating cables, limiting deviations and labeling system 03 / 05

Envisaged as a replacement for:
DIN 43 722

DIN EN 60751 Industrial platinum resistance thermometers and platinum resistance detectors 07 / 96 Repaces DIN IEC 751
DIN IEC 60751 Draft Industrial platinum resistance thermometers and platinum sensors 03 / 05 Envisaged as a replacement for
DIN EN 60751   07 / 96
DIN EN 61515 Sheathed thermocouple cables and sheathed thermocouple assemblies 09 / 96 Replaces DIN 43 721, 
Replaces DIN IEC 65B

Management Systems

Standard Number

Title of the Standard

Version

Comment

DIN EN ISO 9000 Quality management systems: Principles and concepts 12 / 00 This standard is managed by Quality Control
DIN EN ISO 9001      Quality management systems: Requirements                     12 / 00                  

Replaces 
DIN EN ISO 9001   08 / 94
DIN EN ISO 9002   08 / 94
DIN EN ISO 9003   08 / 94

DIN EN ISO 9001 Draft Quality management systems: Requirements                                                                                     10 / 07 Envisaged as a replacement for
DIN EN ISO 9001:200012
DIN EN ISO 9004 Quality management systems: Guidelines for performance improvements                                                                                              12 / 00 Replaces DIN EN ISO 9004-1 08/94
DIN EN ISO 14001 Draft Quality management systems: Requirements with usage instructions 11 / 03 Envisaged as a replacement for
DIN EN ISO 14001:1996-10

Explosion Prevention and Protection

Standard Number

Title of the Standard

Version

Comment

DIN EN 1127-1 Explosion prevention and protection Part 1: Basic concepts and methodology

02 / 08

 
DIN EN 13237 Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres   11 / 03  
DIN EN 13980 Potentially explosive atmospheres: Application of quality management systems 02 / 03  
DIN EN 14460 Draft Explosion-resistant equipment 07 / 02 Implemented in
DIN EN 14460   
Publication date 2007-07
DIN EN 60079-0
VDE 0170 Teil 1
Electrical apparatus for potentially explosive gas atmospheres, Part 0: General requirements 05 / 07 Replaces DIN EN 60079-14    
Publication date 2004-12
DIN EN 60079-1
VDE 0170 Teil 5
Electrical apparatus for potentially explosive gas atmospheres, Part 1: Frame-proof enclosure "d" 04 / 08  
DIN EN 60079-10-1
VDE 0165-101, Draft
Explosive atmosphere, classification of the areas Part 10-1: Potentially explosive gas atmospheres 11 / 07 Envisaged as a replacement for: 
DIN EN 60079-10-1, 11/06
DIN EN 60079-10-2
VDE 0165-102, Draft
Explosive atmospheres, Part 10-2: Classification of combustible dust atmospheres 08 / 07 Envisaged as a replacement for:
DIN 61241-10 (not available)
DIN EN 60079-11
VDE 0170 Teil 7
Explosive atmospheres - Part 11: Equipment protection through intrinsic safety "i" 08 / 07 Replaces DIN EN 50020
Publication date 2003-08
DIN EN 60079-14
VDE 0165 - 1
Explosive atmospheres - Part 14: Design, selection and erection of electrical installations

02 / 07           

Replaces DIN EN 60079 - 14
DIN EN 60079-15
VDE 0170 Part 7
Electrical apparatus for potentially explosive gas atmospheres, Part 15: Construction, testing and labeling electrical apparatus of ignition protection type "n" 05 / 06 Replaces DIN EN 600079-15 
Publication date 05 / 04
DIN EN 50019
VDE 0170 Part 6              
Electrical apparatus for potentially explosive gas atmospheres – electrical apparatus of ignition protection type "e" 03 / 96 New DIN EN 60079-7
(not currently relevant)
DIN EN 50020
VDE 0170 Part 7
Electrical apparatus for potentially explosive gas atmospheres  – intrinsic safety "i" 08 / 03 Still applicable until 01.09.2009
DIN EN 50281-1-1 
VDE 0170-15-1-1                    
Electrical apparatus for use in the presence of combustible dust 11 / 99  
DIN EN 50281-1-2
VDE 0165 Part 2
Electrical apparatus for use in the presence of combustible dust 11 / 99  
DIN EN 50284
VDE 0170-12-1
Special requirements for constructing, testing and labeling electrical apparatus in equipment group II, category 1G 02 / 00  

Calibrations

Standard Number

Title of the Standard

Version

Comment

DIN EN ISO/ IEC 17025                              

General requirements for the competence of testing and calibration laboratories                                                                                                                     

08 / 05              This standard is managed by the DAkkS laboratory manager and is available in the laboratory.

Content Management Software (c)opyright 2000-2011 by HELLMEDIA GmbH
Sensor
deutsch english franšais espa˝ol      print
Reckmann GmbH
Reckmann GmbH
 

 

 

Standards

Standards

Mitglied im
Member of
Membre du


AMA Logo mit Caim

 

News

 

Standards

Reckmann Reckmann
back to top  
back to top
Thermo
     Imprint © 2014 Reckmann GmbH | 
Design: EMANDU« Communications